Převodovka ZF 3055 marine unused 3101003031 pro karavanu MAN D2862LE476





Pokud se rozhodnete koupit zařízení za nízkou cenu, ujistěte se, že komunikujete s reálným prodejcem. Zjistěte si co nejvíce informací o majiteli zařízení. Jedním ze způsobů podvádění je reprezentovat sebe jako skutečnou společnost. V případě podezření nás informujte o této skutečnosti prostřednictvím kontaktního formuláře pro zpětnou vazbu.
Než se rozhodnete pro nákup, pečlivě si přečtěte několik nabídek prodeje, abyste pochopili průměrné náklady na vybraný model. Pokud je cena nabídky, která se vám líbí, mnohem nižší než ceny podobných nabídek, přemýšlejte o tom. Značný rozdíl v cenách může naznačovat skryté vady nebo pokus prodejce o spáchání trestného činu podvodu.
Nekupujte vozidlo, jehož cena se příliš liší od průměrné ceny podobných výrobků.
Nesouhlaste s úhradou zálohy za zboží. Budete-li mít pochybnosti, nebojte se zeptat na podrobnosti a požádejte o další fotografie a dokumenty k vozidlu, abyste ověřili pravost dokumentů, zadávejte další otázky.
Nejběžnější typ podvodu. Nepraví prodejci vás mohou požádat o určitou částku zálohy na "rezervaci" vašeho práva na nákup zařízení. Takto mohou podvodníci shromáždit velké částky a zmizet, přestanou brát telefon.
- Převod předplatného na kartu
- Neplaťte zálohu bez dokladů, které potvrzují převod peněz, pokud během komunikace prodávající vzbuzuje podezření.
- Převod na účet "důvěrné osoby"
- Taková žádost by měla být podezřelá, s největší pravděpodobností komunikujete s podvodníkem.
- Převod na účet firmy s podobným názvem
- Buďte opatrní, podvodníci se mohou vydávat za dobře známé společnosti provedením nepatrné změny v názvu. Nezasílejte prostředky, pokud máte pochybnosti o názvu společnosti.
- Nahrazení vlastních údajů na faktuře skutečné firmy
- Před provedením převodu se ujistěte, že zadané údaje jsou správné a že se vztahují k dané firmě.
Kontakt na prodávajícího


direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------